Advken Manta MTL RTA

Manta MTL RTA box body was taken out in the form of a cover of heaven and earth, and the outer box of devil fish and the name of the product was printed with a reflective plastic paint, which was rather quality. Contents: body, twin-filament, cotton, Kosan Card, wiper, spare O-Rings, and screwdriver.
The atomizer can be decomposed into: 510 suction nozzle, top cover, upper cover, atomization bin, 2ml glass bin and 3ml fat bin each, and the intake adjusting ring and the silk mounting base (forgot to be removed).
The first bright spot must be the eye-catching PEI suction nozzle, and the black bottom with the white Manta MTL. The contrast color is hard to notice. There are six sets of trapezoidal patterns on the outer circumference of the top cover. It is not difficult for the top cover to be slightly thin and screwed, whether it is tightened or opened.
Compared with the top cover, the uncovered upper cover and the atomization bin are difficult to turn over. It is recommended that a hard tool such as a clip or scissors be stuck on the oil injection hole to apply force. The atomized bins are filled with flying devil fish, and there are many openings underneath the decorative nature. When combined with the base, the color of the full gold-plated base will be revealed.
The diameter of the atomizing bin is 16mm, and the height of the top is 10mm. It is still moderate. The top part has two sections to gather, which can further concentrate the flue gas and assist the condensation backflow.
The characteristics of Advken Manta MTL RTA are as follows:
. The suction resistance ranges from 1 to 11 from high to low, and falls within the range of 3 to 5 levels.
. Resolve is concentrated to balanced style.
. The appearance of the nozzle and the atomizer is very special.
. In addition to avoiding oil leakage when unfamiliar, the lower intake side also makes the smoke slightly softer.
. Its overall positioning is not very suitable for the name given to MTL, but if it is regarded as light lung suction or light suction, it does show a good sense of resolution.
. For a nebulizer with a small vent opening, I like the design of the intake adjustment ring, which allows for deeper cleaning.

There are also some hard-to-define designs:
. When you open half the air intake, there will be a larger whistling sound.
. The upper lid and the atomization bin of the fixed glass bin can have less force applied and can not be easily opened. If the manner of fixing the top lid and the upper lid can be changed into a cassette, it can be effectively solved.
. If the internal side air intake hole is added with a slope, the air flow and the pole are zigzag, and the effective range should be bundled in the middle of the coil.
from:www.ecigonlineshop.com